Step 1

Take off the 6 main drum bolts from the main winch frame unit

and drum brake.

Step 2

Pull the drum unit from the main winch frame

onto a work table

Step 3

Unlock the connecting link of the drive chain

and remove the drive chain

Step 4

Take off the connecting bolts to the drum frame unit

and cable guard

Step 5

Take off the main connecting nut

Step 6

Take off the connecting bracket from

the drum unit

Step 7

The drum unit is now ready to separate

from the sprocket unit

Step 8

Lift the drum off the main shaft and clutch assembly

Step 9

To Remove the old clutch pads use a hammer

to "unpean" the connecting box brackets

Step 10

Place your new clutch pads into the boxes

on the drive plate

Step 11

Pictured are the clutch pads placed

onto the clutch pad boxes

Step 12

Use a hammer again to "pean over" the

box brackets to hold the clutch pads in place

Step 13

This photo shows how the pulley rope system should be attached

onto a work table

Important Note:

The rugged and robust construction of the Norse Winch internal frame

components that ensures years of trouble free performance.